Galaxy S7 SM-G930F STOCK ROM - Android 6.0.1 MarshmallowApril 11, 2016
Android 6.0.1 Marshmallow on Samsung Galaxy S7 SM-G930F with the help STOCK Based ROM. Now you install this smooth and bug free ROM on international version of Galaxy S7. This ROM is based on G930FXXU1APD1 firmware which is officially released by Samsung.
in This ROM developer added some mods as well, like 5 way reboot and adblocker etc. i have mentioned other feature of this ROM below, do read it out. This ROM ( stock based Android 6.0.1 Marshmallow ) has specifically developed for Samsung Galaxy S7 SM-G930F not to mention its credit would go to Tkkg1994. We took this ROM from xda and in this article we are going to present you with a comprehensive step-by-step guide on how you can install / Flash stock based Android 6.0.1 Marshmallow ROM on Samsung Galaxy S7 SM-G930F .
If you would like even more information relevant to the ROM, Root and firmware then check out our following pages.
|CyanogenMod-based LineageOS Android 7.1.1 Nougat Custom ROM for Samsung Galaxy S7 edge||April 25, 2017|
|S7 Debloated Android 6.0.1 Marshmallow ROM for Samsung Galaxy S7||August 1, 2016|
|Slim6 Android 6.0.1 Marshmallow ROM for Samsung Galaxy S5 Mini||June 21, 2016|
|EXYFIRE Android 6.0.1 Marshmallow ROM for Samsung Galaxy S7||June 17, 2016|
Coming back to the Rom, here is the features of stock based Android 6.0.1 Marshmallow
Features of Rom
-Prerooted with V2.71 SuperSU (latest one)
-Latest Busybox installed (1.24.1)
-Init.d support in Kernel
-Force encrypt disabled
-Allow adb insecure
-Knox stuff is removed
-Stock APD1 Kernel included
-Latest TouchWiz Sources!
-Debloated, but fully functional (all removed apps can be install with playstore)
-April Security Patches
Warning No. 1
- This is a warning from Best-Tech-Reviews.com that this Guide / Tutorial is only applicable for Samsung Galaxy S7 SM-G930F . Be careful not to try this guide on any other Android device, it does work only with Samsung Galaxy S7 SM-G930F .
- First, you have to verify your device model (Samsung Galaxy S7 SM-G930F) number Under: Settings » About (there you see device name).
- And also note that we are not responsible for any damage caused due to the instruction given in this page.
- Try this at your own risk. If you follow our instructions as it is, which is stated below, it is very unlikely that your device will be damaged
- Above of all your Smartphone must be factory unlocked / Rooted.
- Use Nandroid backup, which basically will take an image of your current system. That way, if something goes wrong, you can restore your phone to exactly the way it was before. (Tutorial Link)
As we mentioned in above, before installing Rom on your Samsung Galaxy S7 SM-G930F you have to take back-up.
For this purpose we have made a tutorial on how you can take complete backup of Samsung Galaxy S7 SM-G930F. Please follow the guide carefully to be able to restore Samsung Galaxy S7 SM-G930F to current system when needed.
This really is an essential step before doing anything to your Samsung Galaxy S7 SM-G930F
- First, you need to enable the Debugging mode on your . (Tutorial Link)
- Find appropriate USB Driver for Samsung Galaxy S7 SM-G930F (need to connect PC / Laptop for Data copy) (Download all Android devices USB drivers)
- You must have at least 70 % battery life remaining. (See how to check your battery percentage)
How to take Complete backup of Samsung Galaxy S7 SM-G930F
So now moving toward backup of Samsung Galaxy S7 SM-G930F . Here is the list, which is necessary to take backup
- Backup all the SMS and SMS Logs, contacts and Calls Logs. – Click here to see how to do this step
- Backup Whatsapp and Viber Messages and call logs. – Click here to see how to do this step
- Backup your Game Data.
- Images, Songs, Videos, Files – Copy to Internal/External SD card.
- APN and MMS Settings – Note down from the path “Applications > Settings > Wireless and Network > Mobile Networks > Access Point Names”
- Backup your Apps and their Data Files via app Download from Play Store
Before going to Flash Rom on Samsung Galaxy S7 SM-G930F , we want to inform you that you need to Root your device first and this step will Void your handset’s warranty. However, there are certain steps to unroot and install the official firmware on it.
Unlock Bootloader of Samsung Galaxy S7 SM-G930F and Flash a Custom Recovery
Before going Flash stock based Android 6.0.1 Marshmallow on your “.Samsung.” “.Galaxy S7 SM-G930F.” you do not actually need to root your phone to flash a ROM. You just need to unlock bootloader of Samsung Galaxy S7 SM-G930F and flash a custom recovery.
However, this likely to root your phone. Therefore rooting the Samsung Galaxy S7 SM-G930F is exactly what you are going to do first. Unfortunately, we cannot go through this step in detail here, for this purpose you need to go to our Rooting section.
NOTE: Unlocking your bootloader will most likely wipe your Samsung Galaxy S7 SM-G930F, and without root access, you won’t be able to backup system. So, it is better to save anything you want to keep on your computer
We will recommend you to search on XDA that how to unlock the bootloader of your Samsung Galaxy S7 SM-G930F. Because every model has its own way to unlock bootloader.
After unlocking bootloader, we will use Nandroid to take backup of Samsung Galaxy S7 SM-G930F. What Nandroid do is, it will take an image of your current system. Which help to restore your device, as before it was. This will save you a lot of hassle if something goes wrong.
To do this:
Step 1: Reboot your Samsung Galaxy S7 SM-G930F and enter recovery mode. This is a bit different on every device, but usually you can reboot by pressing the power and volume buttons at the same time.
Step 2: Go to “Backup” or “Nandroid” section of your recovery mode. The default settings should be fine, you don’t need to do anything with default settings.
Step 3: Take the backup from here and re-name it, it will help you to remember. Confirm your backup setting and let it run.
Step 4: Wait for the backup to finish. This may take 6-10 mints.
We will also recommend you to take the second type of backup: your apps and settings. For this try Titanium Backup.
Note that you will need to root, to use Titanium Backup.
So, Now you are planning to wipe your data and cache, Right? There are some points to read:
- If you are flashing a brand new ROM ( stock based Android 6.0.1 Marshmallow), you definitely need to wipe data and cache. This may perform a factory reset on Samsung Galaxy S7 SM-G930F therefore you will lose all the data.
- If you are flashing a fresh version of identical Rom you are already running, we would suggest Only To WIPE CACHE. It is going to save all your apps and settings.
- Remember, for those who have already taken a backup, then there is absolutely no issue in factory reset, wiping data or the cache. It is possible to restore it anytime.
- When you only wipe your cache, usually particular apps might face issue. You will need to wipe data and the cache both of them to fix everything.
Download Google Apps (Gapps)
How to Flash a ROM to Your Samsung Galaxy S7 SM-G930F
Now comes the actual part. After downloading stock based Android 6.0.1 Marshmallow save it on your phone. It should come in the form of a fairly large ZIP file, so you’ll probably want to be on Wi-Fi to download direct to phone.
To flash the ROM :
Step 1: Reboot the phone into Recovery mode, similar to we performed back when we created our Nandroid backup.
Step 2: Go to the “Install” or “Install ZIP from SD Card” section of your recovery.
Navigate to the ZIP file you saved earlier (stock based Android 6.0.1 Marshmallow ), and then choose it from the list to flash it.
Step 3: Wait for the process to finish, it might take a couple of minutes.
In TWRP, you will locate this under the “Wipe” section.
And in ClockworkMod, you will to either choose the “Wipe Data/Factory Reset” option or the “Wipe Cache Partition” option .
When you are done, you are free to reboot into your new ROM ( stock based Android 6.0.1 Marshmallow ).
Download and Flash Google Apps
As you know that Google’s apps are not open source, that’s why custom ROMs can’t bundle Google’s apps like Gmail, Hangouts, or the Play Store with their ROMs.
Which means you will have to Flash Google Apps separately.You simply need to download Gapps File, Link given in the Download section of this article and it is similar to what we did in flashing ROM (Step 1). But choose the Gapps file.
Gapps Manager is also an excellent app that’ll allow you to find the proper package in case you are stuck, you can download the APK from XDA Developer.
Once you’ve flashed the latest Google Apps package, then it is done. You can also restore all your apps from the backup you have taken from Titanium app. If you have any question, please comment below